AT&T Classic Mail Design Package 1.6 Manual de usuario descargar pdf (Pagina 67)

Equipment Physical Design Standards ATT-TP-76200, Issue 19

AT&T Services, Inc. June 2014

5) AT&T Services may take any or all of the following actions for products approved for

use via a Letter of Attestation that are subsequently found not to conform to

applicable ATT-TP-76200 requirements:

• Suspend further purchase of the product.

• Require previously purchased products be brought into compliance.

• Suspend the supplier's further use of the Fast Track process.

• Hold the supplier liable for any damages directly resulting from the product’s

failure to conform to applicable requirements.

6) The equipment must have been tested and found in conformance to ALL applicable

requirements. The Fast Track Process will not be accepted if any requirement

is not met or is conditionally met.

7) The Fast Track process may NOT be used:

• If the equipment contains integrated protectors.

• For OSP/CELL-SITE enclosures. (ATT-TP-76205 requirements and process

applicable)

• For equipment with radio frequency (RF) transmitting devices

B. AT&T Services Product Evaluation Fast Track Process Procedure for Product Suppliers

1) Verify with the company representative that the Fast Track process is appropriate for

the product/project.

2) Complete all applicable tests required by ATT-TP-76200.

3) Review and verify the product's conformance to ALL applicable requirements.

4) Complete and submit the Letter of Attestation that is applicable for the Type of

Evaluation (i.e., Level 1, Level 3 or Ancillary). A template for the letter is contained

in 16.8. All of the information requested in the applicable template must be

completed. The Letter of Attestation must be signed at director level or above and

notarized.

5) Complete and submit the Test report components list.

6) Complete and submit either form ESP-001 or ESP-002, whichever is applicable for

the product and ATIS Air Flow reports. (ATT-TP76200 Section 6).

7) Complete and submit form Attachment 1, Fast Track Report Form

8) Complete ATT-TP-76450 Checklist and or PbF Form if Not Checked on the Letter of

Attestation.

9) RF- Transmitting Devices require RFTX form and conformance to 2.3.C

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 80 81

Sin comentarios

AT&T Classic Mail Design Package 1.6 Manual de usuario Pagina 67