AT&T Classic Mail Design Package 1.6 Manual de usuario descargar pdf (Pagina 13)

Equipment Physical Design Standards ATT-TP-76200, Issue 19

AT&T Services, Inc. June 2014

Equipment Testing Requirements

Any alterations to the test protocols given in this document or in referenced test standards

documents must be clearly identified in the executive summary and the test results

sections of test reports. Testing performed per the Telecommunications Providers Group

(TCG) checklist will be acceptable to AT&T. This checklist is available on AT&T’s web site

at https://ebiznet.sbc.com/sbcnebs/

• Conditional Requirements and Objectives contained in referenced industry standards

shall not be considered AT&T requirements unless explicitly stated within the

requirements sections of this document

• ETSI standards may be accepted on a case by case basis in lieu of GR/ATIS test

results

Laboratory Accreditation Requirements

For tests completed after January 1

, 2004, AT&T Services will only accept test reports

submitted by testing laboratories that are accredited by an accreditation agency (e.g., the

American Association for Laboratory Accreditation, National Voluntary Laboratory

Accreditation Program) that is recognized by the National Cooperation for Laboratory

Accreditation.

• The scope of accreditation must include the test standards referenced in test reports.

• AT&T Services will accept test reports that include test data generated at non-accredited

test laboratories if the tests are witnessed and verified by a representative from a company

that operates an accredited test laboratory. Records shall be retained that clearly

demonstrate that the individual who witnessed the test has the appropriate expertise and

competence. Submitted test reports shall clearly distinguish test data generated in-house

at an accredited laboratory from witnessed and verified test data. The test report shall also

contain a statement attesting to the compliance of the testing to applicable standards.

• Test laboratories located outside of the United States shall be accredited in accordance

with ISO/IEC Guide 25 or ISO/IEC 17025. This accreditation must be performed by a

nationally recognized accrediting body operating in accordance with ISO/IEC Guide 58.

Testing performed outside of the United States by a non-accredited laboratory or

manufacturer’s performed testing may be accepted if witnessed and verified by a U.S.

Nationally Recognized Testing Laboratory.

• Each test report submitted to AT&T Services shall contain accreditation and scope

information or a letter containing this information may be forwarded for our files.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 80 81

Sin comentarios

AT&T Classic Mail Design Package 1.6 Manual de usuario Pagina 13