AT&T Merlin Guía de instalación descargar pdf (Pagina 315)

If you want to use extra-alerting devices simultaneously, you need to plug the

modular cord for each device into a Line Bridging Adapter which you can

connect to either position (1) or position (2) on the bottom of the extra alert

switch.

For more information, contact your equipment dealer.

ADMINISTRATION

None

PROGRAMMING

None

HOW TO USE

To setup your SAA:

1 Unplug the appropriate voice terminal from its modular wall jack, and plug it

into the jack labeled V.T. on your SAA.

2 Plug one end of the modular cord into the jack labeled C.U. on the SAA and

the other end into the voice terminal’s modular wall jack.

3 Plug the modular cord from the extra alert device into the jack labeled

Alerter on the SAA.

To have the extra alert device turn on when a call rings at the appropriate

voice terminal, turn the SAA to the On position.

If you want to use more than one extra alert device alternately:

1 Turn the extra alert switch’s knob to the appropriate On position labeled

(1) or (2). For example, if you connect a bell to position (1) and a strobe to

position (2), turn the control switch to position (1) to operate the bell and to

position (2) to operate the strobe.

If you want to use more than one extra alert device simultaneously:

1 Turn the extra alert switch knob to the appropriate On position labeled

(1) or (2). For example, if you connect a bell and a strobe to a line bridging

adapter and the adapter to position (1) on the SAA, turn the control switch to

this position.

6-24 Accessory Equipment

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 336 337

Sin comentarios

AT&T Merlin Guía de instalación Pagina 315