AT&T Merlin Guía de instalación descargar pdf (Pagina 19)

System Configuration Form

Use the System Configuration Form to record information about the following:

● Dial Signals

● Long Distance Dialing

● Transfer Return Interval

● Call Report

● Music-on-Hold

● Background Music

● Outside Telephone Lines

● Voice Terminals

The following information should help you make the appropriate entries for your

system on the System Configuration Form.

DIAL SIGNALS

The MERLIN Plus system comes set to generate Touch-Tones when you dial an

outside call. This means that if one or more of your outside telephone lines

transmits rotary (pulse) signals, you have to administer the system for rotary

dialing. Otherwise you won’t be able to dial out over the rotary lines.

NOTE: If some of your outside lines are Touch-Tone and some rotary, you may

want to ask your local telephone company to replace the rotary lines

with Touch-Tone lines.

LONG DISTANCE DIALING

2-2 System Configuration Form

Under “Dial Signals” on the form . . .

Check the box next to “Touch-Tone” if all the outside telephone lines

connected to your system are Touch-Tone lines.

Check the box next to “Rotary (Pulse)” if one or more of the outside lines

connected to your system are rotary lines.

Under “Long Distance Dialing”. . .

Check the box next to “Toll-Prefix” if you have to dial atoll prefix (1 or 0)

before the area code when you dial the telephone number for a

long distance call.

Check the box next to “Area Code Only” if you do not have to dial a toll

prefix (1 or 0) before the area code when you dial the telephone number for a

long distance call.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 336 337

Sin comentarios

AT&T Merlin Guía de instalación Pagina 19