AT&T Merlin Guía de instalación Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 337
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
Administration Procedure
Do This
Reset the system.
WARNING:
This procedure erases all system administration and telephone
programming, returns the system to its factory settings, and restores
initial feature assignments to the phones. Use this feature only
when you want to change the system radically.
1 Enter administration mode.
2 Dial *99198.
The console beeps twice.
3 Turn the power off, wait 10 seconds, and then turn it on again.
4 Leave administration mode.
Select a message to be played with System
1 Enter administration mode.
Answer.
2 Dial *77 followed by the desired option:
0 = no voice message
1
= “Please hold”
2 = “Please hold, your call will be handled momentarily”
NOTE:
If a line number is administered using *50, the following message is
appended to the end of message 1 and 2: “You have reached . . .”
where . . .
is a number entered by the system administrator
for Call Forwarding.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode.
Select number of rings before a call is picked
1 Slide the T/P switch to P and touch Administer.
up by an ASA feature.
2 Dial *76 plus the ASA feature number:
1 = DXD
2 = CF
3 = RLA
4 = SA
3 Dial the number of rings (between 0 and 9) before the ASA feature picks up
the call.
NOTE:
If the number of rings is set to 0, the voice terminal will not ring.
and the calls will be immediately answered.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the T/P switch to the center position.
Assign a template to a voice terminal.
1 Enter administration mode.
2 Dial* 10 followed by the desired template:
1 = Clear template
2 = Dialer template
3 = Feature template
4 = Receptionist/Secretary template
3 Touch the Auto Intercom button or dial the intercom number for the voice
terminal being assigned the template.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
Quick Reference Guide to System Administration
3-47
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 336 337

Comentarios a estos manuales

Sin comentarios