AT&T Merlin Guía de instalación Pagina 148

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 337
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 147
2 Touch the Auto Intercom button or dial the intercom number for the voice
terminal you are administering.
A green light goes on next to the Auto Intercom button. Green lights go on next to the buttons
of any lines already assigned to the voice terminal.
3
Touch the line button until the green light next to it shows the line
assignment you want:
Green light on
= the line is assigned to the voice terminal
Green light off =
the line is not assigned to the voice terminal
4
To make the line Button-Free, dial one of these two codes:
> Dial *31 if you want the voice terminal to ring.
The green light next to the Auto intercom button flashes rapidly.
> Dial *32 if you do not want the voice terminal to ring.
The green light next to the Auto Intercom button flashes slowly.
5
Touch Administer.
The console beeps twice.
6
Leave administration mode by sliding the T/P switch to the center position.
T P
Administer
Susan 15 555-1234
31 or 32
T P
Administer
To remove Button-Free Line Operation by reassigning lines to separate buttons
on a voice terminal:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Touch the Auto Intercom button for the voice terminal you are administering.
3 Dial *34.
A green light should go on next to the lines that have been assigned to the voice terminal.
4
Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to the center position.
T P
Administer
Susan 15
34
T P
Administer
MERLIN Plus System Features
5-29
Vista de pagina 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 336 337

Comentarios a estos manuales

Sin comentarios