AT&T Merlin Guía de instalación Pagina 274

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 337
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 273
Toll Prefix Setting
DESCRIPTION
In most telephone systems people must dial a toll prefix (a 1 or a 0) before they
dial an area code and telephone number. When the MERLIN Plus system is
installed, it is set for dialing a toll prefix. If people in your system don’t need to
dial a toll prefix, the system administrator must set the system for dialing the
area code only.
CONSIDERATIONS
ADMINISTRATION
T P
T P
Administer
Administer
37
T P
T P
Administer Administer
36
PROGRAMMING
HOW TO USE
None
If your responsibilities do not include system administration, skip this
information. To administer the system so people can dial an area code and
telephone number without a toll prefix:
1
2
3
4
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *37.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
To change the system setting so that people must dial a toll prefix before an
area code and a telephone number:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial *36.
3 Touch Administer.
The console beeps twice.
4
Leave administration mode by sliding the T/P switch to the center position.
None
Ask your administrator whether you need to dial a toll prefix
(a 1 or a 0) before you dial an area code and a telephone number.
MERLIN Plus System Features
5-155
Vista de pagina 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 336 337

Comentarios a estos manuales

Sin comentarios