AT&T Merlin Guía de instalación Pagina 229

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 337
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 228
From a BIS-10 Voice Terminal
If you are using a BIS-10 voice terminal, use the following procedure to program
a Personal Speed Dial sequence:
1
2
3
4
Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Dial a Personal Speed Dial code (#01 through #24).
NOTE:
Personal Speed Dial code #23 is preprogrammed for Saved Number
Dial and #24 is preprogrammed for Last Number Dial. You can
assign these Custom Calling features to different Personal Speed
Dial codes, using a slightly modified procedure. Here’s how to
program Last Number Dial or Saved Number Dial onto Personal
Speed Dial code #01:
a Slide the T/P switch to P.
b Dial #01.
c Dial *90.
d Dial #01 again.
e Dial *73 for Last Number Dial or *74 for Saved Number Dial.
f Slide the T/P switch to the center position.
Dial *90 plus a telephone number or a PBX, Centrex, or Custom Calling
feature code. Follow the instructions above if you need to include a special
character in the dialing sequence.
Slide the T/P switch to the center position.
T P
T P
#01-#24
90
tel. no.
From a BIS-22 Voice Terminal
If you are using a BIS-22 voice terminal,
a Personal Speed Dial sequence:
use the following procedure to program
1
2
3
4
Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Dial a Personal Speed Dial code (#01 through #12).
Dial *90 plus a telephone number or a PBX, Centrex, or Custom Calling
feature code. Follow the instructions above if you need to include a special
character in the dialing sequence.
Slide the T/P switch to the center position.
T P
T P
#01-#12
90
tel. no.
5-110 MERLIN Plus System Features
Vista de pagina 228
1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 336 337

Comentarios a estos manuales

Sin comentarios