
4 Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to the center position.
T P
Administer
Drop
71 or 72
T P
Administer
PROGRAMMING
To program a Group Page button for your voice terminal:
1 Label the button Group Page plus a group number.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3
Touch the button you want to program.
4 Dial *91 plus a Group Page code:
70 =
Page-All (all voice terminals in the system)
71 = group 1
72 =
group 2
5 Slide the T/P switch to the center position.
T P
T P
Grp. Page
Group 2
91
70-72
HOW TO USE
You can use a programmed button or a dial code to access this feature.
To use a Group Page button to make an announcement through a group of
voice terminal speakers:
1 Touch the Group Page button for the group you want to page.
2 When you hear a beep, lift your handset and make the announcement.
NOTE:
If you don’t lift your handset to make the announcement and another
BIS terminal is nearby, you may hear a loud squeal from your
voice terminal.
Grp. Page
Group 2
5-76 MERLIN Plus System Features
Comentarios a estos manuales