AT&T Telephone R1V2 Manual de usuario descargar pdf (Pagina 32)

Miscellaneous System Options

From the Main menu prompt, enter 4, then set the following

system options:

To block

maintenance 1 At

Action = , enter 70.

busy of Ground Start

trunks

2 At

Data = , enter 0 for no or 1 for yes.

The default is 0@.

To assign the Central

Note This code cannot be changed after any trunks have been

Office trunk pool access assigned with this facility access code.

code

1 At

Action = , enter 71.

2 At

Data = , enter the CO trunk access code. The default

is 100, 101, or 102, depending on the trunk type.

To set the number of DID

1 At

Action = , enter 72.

digits used to match

against station PDCs

2 At

Data = , enter a number between 2 and 4.

The default is 3.

Expert Mode Prompt

To change the expert

1 From the Main menu prompt, enter 4.

mode prompt

2 At

Action = , enter 74.

3 At

Data = , enter the new prompt (nine or fewer printable

characters). The default is “Command:”.

@ Strongly recommended this value be used.

4-6 Administering System-Wide Options

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 155 156

Sin comentarios

AT&T Telephone R1V2 Manual de usuario Pagina 32