AT&T Telephone R1V2 Manual de usuario Pagina 139
- Pagina / 156
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
TABLE 16-19 System Administration (Menu=4) (continued)
ACTION
DESCRIPTION
DATA
41
Specify the number of rings before calls
[0-31;
2]
are sent to call coverage or call following
calls return to their home station
50
Set time of day
[HHMM]
51
Set the date
[MMDDYY]
52
Allow SMDR records to be sent to the
[1=Y
/ 0=N]
SMDR port
53
Start billing calls how many seconds after
[10-255;
40]
the last digit is dialed
60
Specify the modem request code
[1-9999;
820]
61
Does the receiver respond to remote loop
[1=Y
/ 0=N]
62
Disconnect on loss of carrier
[1=Y
/ 0=N]
63
Are pins CF and CB common
[1=Y
/ 0=N]
64
Disconnect on received space
[1=Y
/ 0=N]
65
Should the system send a space character
[1=Y
/ 0=N]
on disconnect
70
Should maintenance busy of GS trunks be
[1=Y /
0=N]
blocked?
71
Assign the CO trunk pool access code
[1-9999]
72
Set the number of DID digits used to
[2-4; 0 for none; 3]
match against station PDCs
73
Assign the number of account code digits
[0-15;
15]
74
Display/change expert mode prompt (less
[“Command: “]
than 9 printable characters)
75
Change administration password (less
[”8 characters or less”]
than 8 printable characters, no spaces
allowed, display always shows “????????” )
81
Switched Loop Attendant system: Audible
[1=Y /
0=N]
tone at expiration of hold timer?
Continued on next page
Command Reference
16-23
- AT&T SYSTEM 25 1
- System 25 Documents 4
- Contents 5
- Administering Data Line and 6
- STARLAN CP Ports 6
- Introduction 9
- Using this Manual 10
- How to Use the System 11
- Correcting Typing Errors 12
- Making Backup Tapes 12
- Main Menu Items 13
- Administration Commands 14
- Command Functions 15
- Action Groups 17
- Display Support IDs 18
- System Responses 20
- Print Messages 21
- Warning Messages 21
- Initializing the System 22
- Limited Default Cold Start 23
- Unassigned Trunk Ports 23
- Initialization Sequence 24
- 3-4 Initializing the System 25
- TABLE 3-2 26
- (continued) 26
- Initializing the System 3-5 26
- Toll Restriction Options 27
- Call Coverage Options 28
- Pooled Modem Options 29
- Time of Day 30
- Call Accounting Options 31
- Miscellaneous System Options 32
- Expert Mode Prompt 32
- Administration Password 33
- Floating PDCs (FPDCs) 34
- Virtual Facilities 35
- System Speed Dialing 36
- Administering Trunks 37
- TABLE 5-1 Trunk-Type Codes 38
- Action=2 38
- 5-2 Administering Trunks 38
- Removing a Trunk 39
- 5-4 Administering Trunks 40
- Class-of-Service Options 41
- Display Support 43
- DGC Delay Announcement 46
- Music-on-Hold 46
- Pooled Modem 47
- Additional Tone Detector 47
- Dictation 47
- Administering Voice Stations 48
- Removing a Voice Station 49
- Changing a Station Dial Code 50
- Moving a Voice Station 51
- ■ 0 for none 53
- Multiline Voice Stations 54
- Adding a Data Station 58
- Removing a Data Station 59
- Changing a Data Dial Code 60
- Moving a Data Station 60
- Assigning Class-of-Service 61
- Default Attendant Assignments 67
- Move an Attendant Console 69
- Change an Attendant PDC 69
- Remove an Attendant Console 69
- Assigning Features to Buttons 78
- Default Button Assignments 78
- Selector Console (DXS) 79
- Button Assignment Tables 80
- Consoles 83
- ARS Patterns 92
- Define Subpattern B 94
- Remaining ARS Patterns 95
- Home Area Code Exception List 96
- ARS Digit Translation Tables 98
- Using the Digital Tape Unit 100
- Save Your Translations 101
- Verify the Saved Translations 102
- INITIATED WARM START 104
- RESTORE FAILED 104
- System Searches 105
- Display Support Searches 113
- Listing Circuit Packs 115
- Command Reference 118
- † Read-only feature for SLAC 120
- ‡ Not administrable for SLAC 120
- 16-4 Command Reference 120
- 16-6 Command Reference 122
- 16-8 Command Reference 124
- † Cannot be changed 126
- 16-10 Command Reference 126
- * Read-only for STARLAN CP 128
- 16-12 Command Reference 128
- 16-14 Command Reference 130
- TABLE 16-12 Trunk Type Codes 131
- TABLE 16-16 Port Options 135
- 16-20 Command Reference 136
- 16-22 Command Reference 138
- 16-24 Command Reference 140
- 16-26 Command Reference 142
- 16-28 Command Reference 144
- 16-32 Command Reference 148
- 16-34 Command Reference 150
- Requirements for the SAT 152
Relacionado con productos y manuales para No AT&T Telephone R1V2
No AT&T 982 Manual de usuario
(1 paginas)
(1 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.066 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales