AT&T Telephone R1V2 Manual de usuario Pagina 102
- Pagina / 156
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
To troubleshoot
If the save is successful, the SAT displays:
SAVE COMPLETED SUCCESSFULLY
5 Press the STOP/EJECT button on the tape unit.
6 Rewind the tape.
7 Follow the Verify procedure below.
If the Save is not successful, the SAT displays:
SAVE FAILED
1 Rewind the tape and repeat the Save procedure.
2 If this save is successful, follow steps 5 through 7 above.
3 If this save is not successful, contact your AT&T service
representative.
Verify the Saved Translations
To begin 1 Insert cassette and rewind the tape (as required).
2 Press the PLAY button on the tape unit. (The tape unit
does not begin to operate yet.)
To Verify
1 From the Main Menu prompt, enter 9 to select
Save/Restore.
2 At Action = , enter 2. You see:
Save/Restore: Action = 2 Data =
3 Type d and at Data = , enter 1.
You see this warning message:
W25: YOU ARE ABOUT TO START A TAPE VERIFY
c for continue, any other key to abort
4 Type c. The entire line now reads:
Save/Restore: Action = 2 Data = 1
The tape unit automatically starts the Verify procedure.
The tape unit stops when the verification is complete.
If the verification is successful, the SAT displays:
VERIFY COMPLETED SUCCESSFULLY
(continued)
Administering Tape Save/Restore Operations
13-3
- AT&T SYSTEM 25 1
- System 25 Documents 4
- Contents 5
- Administering Data Line and 6
- STARLAN CP Ports 6
- Introduction 9
- Using this Manual 10
- How to Use the System 11
- Correcting Typing Errors 12
- Making Backup Tapes 12
- Main Menu Items 13
- Administration Commands 14
- Command Functions 15
- Action Groups 17
- Display Support IDs 18
- System Responses 20
- Print Messages 21
- Warning Messages 21
- Initializing the System 22
- Limited Default Cold Start 23
- Unassigned Trunk Ports 23
- Initialization Sequence 24
- 3-4 Initializing the System 25
- TABLE 3-2 26
- (continued) 26
- Initializing the System 3-5 26
- Toll Restriction Options 27
- Call Coverage Options 28
- Pooled Modem Options 29
- Time of Day 30
- Call Accounting Options 31
- Miscellaneous System Options 32
- Expert Mode Prompt 32
- Administration Password 33
- Floating PDCs (FPDCs) 34
- Virtual Facilities 35
- System Speed Dialing 36
- Administering Trunks 37
- TABLE 5-1 Trunk-Type Codes 38
- Action=2 38
- 5-2 Administering Trunks 38
- Removing a Trunk 39
- 5-4 Administering Trunks 40
- Class-of-Service Options 41
- Display Support 43
- DGC Delay Announcement 46
- Music-on-Hold 46
- Pooled Modem 47
- Additional Tone Detector 47
- Dictation 47
- Administering Voice Stations 48
- Removing a Voice Station 49
- Changing a Station Dial Code 50
- Moving a Voice Station 51
- ■ 0 for none 53
- Multiline Voice Stations 54
- Adding a Data Station 58
- Removing a Data Station 59
- Changing a Data Dial Code 60
- Moving a Data Station 60
- Assigning Class-of-Service 61
- Default Attendant Assignments 67
- Move an Attendant Console 69
- Change an Attendant PDC 69
- Remove an Attendant Console 69
- Assigning Features to Buttons 78
- Default Button Assignments 78
- Selector Console (DXS) 79
- Button Assignment Tables 80
- Consoles 83
- ARS Patterns 92
- Define Subpattern B 94
- Remaining ARS Patterns 95
- Home Area Code Exception List 96
- ARS Digit Translation Tables 98
- Using the Digital Tape Unit 100
- Save Your Translations 101
- Verify the Saved Translations 102
- INITIATED WARM START 104
- RESTORE FAILED 104
- System Searches 105
- Display Support Searches 113
- Listing Circuit Packs 115
- Command Reference 118
- † Read-only feature for SLAC 120
- ‡ Not administrable for SLAC 120
- 16-4 Command Reference 120
- 16-6 Command Reference 122
- 16-8 Command Reference 124
- † Cannot be changed 126
- 16-10 Command Reference 126
- * Read-only for STARLAN CP 128
- 16-12 Command Reference 128
- 16-14 Command Reference 130
- TABLE 16-12 Trunk Type Codes 131
- TABLE 16-16 Port Options 135
- 16-20 Command Reference 136
- 16-22 Command Reference 138
- 16-24 Command Reference 140
- 16-26 Command Reference 142
- 16-28 Command Reference 144
- 16-32 Command Reference 148
- 16-34 Command Reference 150
- Requirements for the SAT 152
Relacionado con productos y manuales para No AT&T Telephone R1V2
No AT&T 982 Manual de usuario
(1 paginas)
(1 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.089 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales