AT&T Wireless Home Phone Base Guía de usuario descargar pdf (Pagina 8)

Check the Wireless Signal

Wait a few seconds for the signal strength light to turn on, while your device

connects to the cellular network.

Conﬁrm signal strength

light is green for optimal

performance. Yellow

indicates a moderate

signal and may

be sufﬁcient.

NOTE: If you do not see a green light, you may want to choose another

location in your home, such as near a window or outside wall.

STEP 1: Set Up Your Device (continued)

Turn on Your Device

1. Plug the power cord into an electrical wall outlet.

2. Connect the other end of the power cord into the Power Input port on

the back of your AT&T Home Base.

3. Press and hold down the round On/Off button for 3 full seconds until the

power light stays steady green.

On/Off

Hold 3 seconds

6 Getting Started

STEP 2: Connect Your Phone

Unplug your Phone from the Wall Jack

The AT&T Home Base is not used with your home phone wall jack.

NOTE: If you have a cordless phone, keep it plugged into a power outlet.

Connect your Phone to the Device

Plug your phone into the “Phone 1” port on the AT&T Home Base, using your

existing phone cable or the included phone cable.

NOTE: Do not plug the device into your home phone wall jack.

Getting Started 7

Signal

Strength

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Sin comentarios

AT&T Wireless Home Phone Base Guía de usuario Pagina 8