AT&T Definity 8510T Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 83
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
1 Place the voice terminal face down on a flat surface.
2 Using the thumb notches beside the kickstand, lift the kickstand from
the desktop stand.
3 Pass the line cord (and adjunct cord, if applicable) under the
kickstand.
4 Snap the adjunct cord into the "ADJUNCT" jack until you hear a click.
See Figure 5 for the location of the "ADJUNCT" jack.
5 Route the adjunct cord through the channel. Refer to the "Desktop
Installation" section for instructions.
6 Connect the free end of the adjunct cord to your speakerphone or
headset adapter.
NOTE: Refer to the adjunct’s installation documentation for its power
requirements.
71
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83

Comentarios a estos manuales

Sin comentarios