AT&T Definity 6416D+M Manual de usuario descargar pdf (Pagina 2)

2

Install the module ( ) in the desktop

stand ( ). Push down until you hear the

module snap in place.

Hint: The analog adjunct jack on the module

should be pointing toward the module opening

on the desktop stand and the cable on the

module should be facing up.

Carefully align the module ribbon cable to the

mating receptacle on the bottom of the

telephone and insert slowly.

Connect the stand-alone local auxiliary power

supply ( ). With the D8W cord, connect the

auxiliary power supply (the PHONE jack) to the

Line jack on the telephone ( ). Then, connect

the power supply (the LINE jack on the power

supply) to a wall jack ( ).

Hint: The 100A module requires auxiliary

power, and you must use an 8-wire line cord

from the telephone to the power supply.

Replace the stand and module by lowering the

desktop stand onto the bottom of the

telephone. The tabs on the stand must snap

into the appropriate slots on the bottom of the

telephone. (These slots are marked with

arrows in the accompanying drawing on the

left.)

3

3A

3B

3A

3B

4

LINE

PHONE

-7 +8

POWER ON

5

D8W

5A

5C

5B

D2R

5A

5B

5C

6

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios