AT&T Definity 8510T Manual de usuario descargar pdf (Pagina 84)

Data Options and Profiles

Storing an Active Profile, pA

If you want to save the active profile as a stored profile, type:

copy pA to p2

The above command stores your active profile in p2. The system responds:

p2 updated

If you want to store your active profile in p1, repeat the steps above but

substitute p1 for p2. Remember, in pA you cannot program your options; the

settings in pA, therefore, are not automatically stored. You must copy pA to a

stored profile (p1, p2, p3, or p4) so your active profile is not lost in the event of a

power failure.

Activating a Stored Profile

To activate a stored profile, type the following command at the CMD: prompt:

copy profile to pA

For example, to activate p1, type:

copy p1 to pA

. The ADM activates the profile

requested and responds:

pA updated

Replacing One Stored Profile with Another

To replace one stored profile with another, type

copy replacement profile to

replaced profile

. For example, type:

copy p0 to p1

replaces the values of p1

with the values of p0.

4-26

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 119 120

Sin comentarios

AT&T Definity 8510T Manual de usuario Pagina 84