AT&T PagePac Plus AmpliCenter Guía de instalación Pagina 55
- Pagina / 92
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Music Enable
This is an individual zone output parameter, that enables background
music to be broadcast to a selected output zone (in the absence of a
higher priority paging output). The choice is YES/NO, with the default
being NO.
Programming Steps
First access the PagePac Plus system and enter the programming mode
by pressing [
* ] [ * ] and entering your Programming password (if optioned).
You may exit the programming mode by dialing [
# ].
You will need to repeat this procedure for each output zone that you wish
to have background music.
1.
2.
3.
Dial [
7
] [
4
] to select this option.
Hear a DOUBLE beep.
Enter the zone number, of the zone you wish to configure. Use
ALlAS numbers, if optioned. Otherwise, use Physical zone/group
numbers.
Hear a DOUBLE beep.
Enter [
0 ] for NO (Music Not Enabled) or enter [ 1 ] for YES (Music
enabled)
Hear TRIPLE beeps.
To verify the status of Music Enable for a given zone, dial [
7 ] [ 5 ] and
repeat steps 2 and 3 above.
These actions are summarized in table 2-18.
Table 2-18. Music Enable
Feature
Mode Option/
Verify
Dial
Listen
For
Zone/Group
Selection
Listen
For
Choose Option
Listen
For
Default
Music
To Select
74
DoubIe (Z)
Double
0–No
Triple
No
Enable To Verify
75
Beep
Beep
1 – Yes
Beeps
2-26 ogramming The Controller
- AT&T 1
- Trademarks 2
- Warranty 2
- Ordering Information 2
- Support Telephone Numbers 2
- Contents 3
- About This Guide 5
- How to Use This Guide 5
- Getting Started 6
- How to Comment on This Guide 6
- Product Ordering Information 6
- Reference Materials 6
- Overview 7
- ■ LED Indicators 8
- ■ Back Panel Nomenclature 8
- ■ Connectors on Rear 8
- About PagePac Plus 9
- Security Protection 10
- Overview 1-5 11
- Managing the System 12
- Installing System Hardware 12
- Changing System Settings 12
- Training Co-Workers 12
- Solving Problems 12
- Application Notes 13
- Features and Capabilities 13
- Daily Operation 13
- Factory-Set Default Inputs 14
- Eight Primary Paging Zones 15
- 48 Expansion Zones 15
- Three Output Types 16
- Talk-Back Amplifier 16
- Tone Generator 16
- Programming Memory 16
- Hardware Configuration 16
- Indicators and Connectors 17
- LED Indicators 17
- Back Panel Nomenclature 17
- Amplicenter: 18
- Controller Unit: 18
- Zone Expansion Unit: 18
- Overview 1-13 19
- Connectors on Rear 20
- Interface Considerations 21
- Zone Map 22
- Table 1-1. Zone Map Example 23
- 1-18 Overview 24
- (Continuation Page 1) 25
- 1-20 Overview 26
- (Continuation Page 3) 27
- Zone Configuration Tables 28
- Input Zones 29
- Programming The Controller 30
- Error Tones 31
- Introduction 32
- Programming by PC 32
- At Power Up 33
- Enter Programming Mode 34
- Reset to Factory Defaults 35
- Programming Steps 36
- Connect Password 37
- Programming Password 39
- Forgot the Password? 40
- Confirmation Tone ON/OFF 40
- Pre-Announcement Tone ON/OFF 41
- Talk-Back Warning Tone 42
- VOX Disconnect Timing 43
- Computer Monitor 44
- Input Computer Monitor 45
- COPY Command 46
- Type of Zone: Input or Output 48
- Input Priority Arrangement 49
- Zone Monitor 50
- Zone Grouping 51
- Type of Output 52
- Page Enable 54
- Music Enable 55
- 7 ] [ 7 ] and 56
- Night Bell Enable 57
- Pass DTMF to the Output 58
- Tone Selection 60
- 9 ] [ 3 ] and repeat 61
- Tone Routing 62
- Audio Source Enable 63
- Audio Routing 64
- To Enter the 66
- Programming Mode 66
- The Copy Command 69
- Operation 70
- Power UP 71
- System Administrator 71
- End User 71
- Within 10 Seconds 72
- After 10 Seconds 72
- Unlock the Door 72
- User Quick Reference Card 73
- A-2 Application Notes 76
- Background Music 77
- A-4 Application Notes 78
- Door Control 79
- A-6 Application Notes 80
- Alarm System Input 81
- A-8 Application Notes 82
- Talkback 83
- A-10 Application Notes 84
- Computer Monitor Paging Log 85
- A-12 Application Notes 86
- Amplifiers 87
- A-14 Application Notes 88
- IN-2 Index 90
Relacionado con productos y manuales para Amplificadores de audio AT&T PagePac Plus AmpliCenter
Amplificadores de audio AT&T 8434 Manual de usuario
(38 paginas)
(38 paginas)
Amplificadores de audio AT&T 8434 Manual de usuario
(13 paginas)
(13 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales