AT&T Models 1030/3070 with Feature Module 4 Manual de usuario descargar pdf (Pagina 83)

PROGRAMMING SIMULTANEOUS VOICE AND DATA CALLS

When a voice terminal in your system is connected to

a General

Purpose Adapter

and a

modem, it

can link the

user’s

computer terminal to a local

remote host com-

puter. With the Simultaneous Voice and Data Call feature, the user can place or

receive calls on his or her voice terminal without interrupting the exchange of data

between the computer terminal and the host computer. Use Centralized Voice Ter-

minal Programming or follow the procedure below to program this feature.

1. Go to the voice terminal you want to program.

2. Slide the T/P switch on the left side of the voice terminal to P.

The voice terminal rings every 5 seconds to remind you it is in program

mode.

3. Touch

Message

until the green light next to it shows the appropriate

code. Each successive touch gives you one of these codes:

Steady green on =

simultaneous voice and data calls permitted

Green

off =

simultaneous voice and data calls not permitted

If you have more features

program on this voice terminal, you can

do so. Otherwise, slide the T/P switch to the center position to return

to normal operation.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 122 123

Sin comentarios

AT&T Models 1030/3070 with Feature Module 4 Manual de usuario Pagina 83