AT&T Synapse Guía de instalación Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Synapse Installation Guide Back to Contents
Installation 37
To connect the T1 Gateway T1 cable:
Plug the black T1 cable into the Gateway T1 Port, as shown in Figure 18, and into your
T1/PRI network device from your service provider.
Figure 18. T1 Gateway Line Connections
Do not make any calls until the POWER and the SYN/ACT LEDs are green. See “T1
Gateway Features” on page 59.
T1 Port
T1 Status Indicators
The SB67060 T1 Gateway must use only No.26 AWG or larger
Telecommunications line cord to reduce the risk of fire.
For customer service or product information, visit our website at
www.telephones.att.com/smb or call 1 (888) 916-2007. In Canada
dial
1 (888) 883-2474.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 167 168

Comentarios a estos manuales

Sin comentarios